#
# Copyright (C) 2009-2019 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#

include $(TOPDIR)/rules.mk

PKG_NAME:=uhub
PKG_VERSION:=0.5.0
PKG_RELEASE:=4

PKG_SOURCE_PROTO:=git
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-src.tar.gz
PKG_SOURCE_URL:=https://github.com/janvidar/uhub
PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
PKG_SOURCE_VERSION:=90d05c9a19d3f72e3bdc89e4906c9e254e6a7f10
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)

include $(INCLUDE_DIR)/package.mk
include $(INCLUDE_DIR)/cmake.mk

define Package/uhub
  SUBMENU:=P2P
  SECTION:=net
  CATEGORY:=Network
  DEPENDS:=+libevent +libopenssl +libsqlite3
  TITLE:=High performance ADC hub
  URL:=http://www.uhub.org
endef

define Package/uhub/description
    uhub is a high performance peer-to-peer hub for the ADC network.
        Its low memory footprint allows it to handle several thousand users
        on high-end servers, or a small private hub on embedded hardware.
endef
define Build/Configure
    $(call Build/Configure/Default)
endef

CMAKE_OPTIONS =

define Package/uhub/install
    $(INSTALL_DIR) $(1)/usr/bin
    $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/uhub $(1)/usr/bin/
    $(INSTALL_BIN) $(PKG_BUILD_DIR)/uhub-admin $(1)/usr/bin/
    $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/uhub-passwd $(1)/usr/bin/
    $(INSTALL_DIR) $(1)/etc/uhub/
    $(INSTALL_DIR) $(1)/usr/lib/uhub/
    $(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/uhub/mod_welcome.so $(1)/usr/lib/uhub/
    $(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/uhub/mod_logging.so $(1)/usr/lib/uhub/
    $(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/uhub/mod_chat_history.so $(1)/usr/lib/uhub/
    $(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/uhub/mod_topic.so $(1)/usr/lib/uhub/
    $(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/uhub/mod_auth_simple.so $(1)/usr/lib/uhub/
    $(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/uhub/uhub.conf $(1)/etc/uhub/
    $(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/uhub/plugins.conf $(1)/etc/uhub/
    $(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/uhub/rules.txt $(1)/etc/uhub/
endef

define Package/uhub/conffiles
/etc/uhub/uhub.conf
/etc/uhub/plugins.conf
endef

$(eval $(call BuildPackage,uhub))

# uhub.conf - A example configuration file.
# You should normally place this file in /etc/uhub/uhub.conf
# and customize some of the settings below.
#
# This file is read only to the uhub deamon, and if you
# make changes to it while uhub is running you can send a
# HUP signal to it ( $ killall -HUP uhub ), to reparse configuration (only on UNIX).
# All configuration directives: http://www.uhub.org/config.php

# Bind to this port and address
# server_bind_addr=any means listen to "::" if IPv6 is supported
# by the host OS, otherwise 0.0.0.0.
server_port=411
server_bind_addr=any

# Alternative server ports
# server_alt_ports = 1512, 1513

# The maximum amount of users allowed on the hub.
max_users=500

# If 1, will show a "Powered by uHub/{VERSION}".
show_banner=1

# If enabled then operating system and cpu architecture is part of the banner.
show_banner_sys_info=1

# Allow only registered users on the hub if set to 1.
registered_users_only=0

# A server name and description.
hub_name=DCBEELINEKZ
hub_description=DCBEELINEKZ http://dcbeelinekz.do.am

# Set this to 0, and the hub will disconnect everyone
hub_enabled=1

# Access control list (user database)
file_acl=/etc/uhub/users.conf

# This file can contain a conf for plugin subsystem
file_plugins = /etc/uhub/plugins.conf

# Slots/share/hubs limits
limit_max_hubs_user = 0
limit_max_hubs_reg = 0
limit_max_hubs_op = 0
limit_max_hubs = 0
limit_min_hubs_user = 0
limit_min_hubs_reg = 0
limit_min_hubs_op = 0
limit_min_share = 0
#    Example:
#    To require users to share at least 1 GB in order to enter the hub:
#    limit_min_share = 1024
limit_max_share = 0
limit_min_slots = 0
limit_max_slots = 0

# Flood control support:
# set the interval to 5 seconds
flood_ctl_interval = 5

# Then the maximum chat, connect, search, updates etc will be measured over 5 seconds.
# So, 3 chat messages per 5 seconds allowed.
flood_ctl_chat=3
flood_ctl_connect=20
flood_ctl_search=1
flood_ctl_update=2
flood_ctl_extras=5

# chat control
# if chat_is_privileged=yes only registered users may write in main chat
chat_is_privileged = no


# if obsolete_clients=1 allows old clients to enter , 0 gives an error message (msg_proto_obsolete_adc0) if they try connect
# defaults obsolete_clients=1
obsolete_clients=1


# Configure status message as sent to clients in different circumstances.
msg_hub_full                   = Hub is full
msg_hub_disabled               = Hub is disabled
msg_hub_registered_users_only  = Hub is for registered users only
msg_inf_error_nick_missing     = No nickname given
msg_inf_error_nick_multiple    = Multiple nicknames given
msg_inf_error_nick_invalid     = Nickname is invalid
msg_inf_error_nick_long        = Nickname too long
msg_inf_error_nick_short       = Nickname too short
msg_inf_error_nick_spaces      = Nickname cannot start with spaces
msg_inf_error_nick_bad_chars   = Nickname contains invalid characters
msg_inf_error_nick_not_utf8    = Nickname is not valid utf8
msg_inf_error_nick_taken       = Nickname is already in use
msg_inf_error_nick_restricted  = Nickname cannot be used on this hub
msg_inf_error_cid_invalid      = CID is not valid
msg_inf_error_cid_missing      = CID is not specified
msg_inf_error_cid_taken        = CID is taken
msg_inf_error_pid_missing      = PID is not specified
msg_inf_error_pid_invalid      = PID is invalid
msg_ban_permanently            = Banned permanently
msg_ban_temporarily            = Banned temporarily
msg_auth_invalid_password      = Password is wrong
msg_auth_user_not_found        = User not found in password database
msg_user_share_size_low           = User is not sharing enough
msg_user_share_size_high       = User is sharing too much
msg_user_slots_low           = User has too few upload slots
msg_user_slots_high           = User has too many upload slots
msg_user_hub_limit_low            = User is on too few hubs
msg_user_hub_limit_high           = User is on too many hubs
msg_error_no_memory            = Out of memory
msg_user_flood_chat            = НЕ ПИЗДИ МНОГО.
msg_user_flood_connect         = Connect flood detected, connection refused.
msg_user_flood_search          = Search flood detected, search is stopped.
msg_user_flood_update          = Update flood detected.
msg_user_flood_extras          = Flood detected.

# If a client that supports ADC but not a compatible hash algorithm (tiger),
# then the hub cannot accept the client:
msg_proto_no_common_hash       = No common hash algorithm.

# Message to be shown to old clients using an older version of ADC than ADC/1.0
msg_proto_obsolete_adc0        = Client is using an obsolete ADC protocol version.

# ATTENTION!
# Plugins are invoked in the order of listing in the plugin config file.


# Sqlite based user authentication.
#
# This plugin provides a Sqlite based authentication database for
# registered users.
# Use the uhub-passwd utility to create the database and add/remove users.
#
# Parameters:
# file: path/filename for database.
#
#plugin /usr/lib/uhub/mod_auth_sqlite.so "file=/etc/uhub/users.db"

# Topic commands.
# Note: "topic" == "hub description" (as configured in uhub.conf)
#
# !topic      - change the topic (op required)
# !showtopic  - show the topic
# !resettopic - reset the topic to the default (op required)
#
# This plugins takes no parameters.
plugin /usr/lib/uhub/mod_topic.so

# Log file writer
#
# Parameters:
# file: path/filename for log file.
# syslog: if true then syslog is used instead of writing to a file (Unix only)
plugin /usr/lib/uhub/mod_logging.so "file=/var/log/uhub.log"

# A simple example plugin
#plugin /usr/lib/uhub/mod_example.so

# A plugin sending a welcome message.
#
# This plugin provides the following commands:
# !motd - Message of the day
# !rules - Show hub rules.
#
# Parameters:
# motd: path/filename for the welcome message (message of the day)
# rules: path/filenam for the rules file
#
# NOTE: The files MUST exist, however if you do not wish to provide one then these parameters can be omitted.
#
# The motd/rules files can do the following substitutions:
# %n - Nickname of the user who entered the hub or issued the command.
# %a - IP address of the user
# %c - The credentials of the user (guest, user, op, super, admin).
# %% - Becomes '%'
# %H - Hour 24-hour format (00-23) (Hub local time)
# %I - Hour 12-hour format (01-12) (Hub local time)
# %P - 'AM' or 'PM'
# %p - 'am' or 'pm'
# %M - Minutes (00-59) (Hub local time)
# %S - Seconds (00-60) (Hub local time)
plugin /usr/lib/uhub/mod_welcome.so "motd=/etc/uhub/motd.txt rules=/etc/uhub/rules.txt"

# Load the chat history plugin.
#
# This plugin provides chat history when users are connecting, or
# when users invoke the !history command.
# The history command can optionally take a parameter to indicate how many lines of history is requested.
#
# Parameters:
# history_max:     the maximum number of messages to keep in history
# history_default: when !history is provided without arguments, then this default number of messages are returned.
# history_connect: the number of chat history messages to send when users connect (0 = do not send any history)
plugin /usr/lib/uhub/mod_chat_history.so "history_max=200 history_default=10 history_connect=5"

#!/bin/sh /etc/rc.common
# uhub launcher

START=50
STOP=10
USE_PROCD=1
UHUB=/usr/bin/uhub

start_service() {
  procd_open_instance
  procd_set_param command $UHUB -l /var/log/uhub.log -vvv
  procd_set_param respawn ${respawn_threshold:-3600} ${respawn_timeout:-5} ${respawn_retry:-5}
  procd_set_param file /etc/uhub/uhub.conf
  procd_set_param stdout 1
  procd_close_instance

}

stop() {
    killall $UHUB
}

2019-02-03 03:34:57   INFO: Starting uhub/0.5.0, listening on :::411...
2019-02-03 03:34:57   INFO: Loaded plugin: /usr/lib/uhub/mod_topic.so: Topic plugin, version 1.0.
2019-02-03 03:34:57   INFO: Loaded plugin: /usr/lib/uhub/mod_logging.so: Logging plugin, version 1.0.
2019-02-03 03:34:57   INFO: Loaded plugin: /usr/lib/uhub/mod_welcome.so: Welcome plugin, version 0.1.
2019-02-03 03:34:57   INFO: Loaded plugin: /usr/lib/uhub/mod_chat_history.so: Chat history plugin, version 1.0.
2019-02-03 03:35:01 LoginOK     AAAB/ZC2PJJGGN2N4SUFE7IDF4UMLC4VBJGU4ZQHHVEI 192.168.1.216 "DCBEELINEKZ" (guest) "++ 0.699"

cd /tmp
mtd -e firmware -r write название_прошивки.bin firmware

local sBot = SetMan.GetString(21)

sHelloMessages = {
["TROJAN"] = "     Подтянув Галстук, Аккуратно Причесан и Одет в Черном, Блестящем Смокинге. Главный Администратор хаба Открыл Дверь.. и вошел в главный зал хаба! Предклонитесь Перед Богом Хаба.. и Он благословит вас- мы Приветствуем тебя, о TROJAN!",  -- ДобАвляем свои привеТствиЯ кому надо!
["Не-TROJAN"] = " Поприветствуем Модератора Не-TROJAN!",
["Ksan"] = " А вот и Ksan! Как мы тебе рады, заходи, раздевайся и будь как дома! :) ",
["Test_user"]  = " Вау, кто к нам пришёл, - сам Test_user! Как мы тебе рады, заходи, раздевайся и будь как дома! :) ",
}

function UserConnected(tUser)
    local sHelloMes = sHelloMessages[tUser.sNick]
    if sHelloMes then
        Core.SendToNick(tUser.sNick,"<"..sBot.."> ••• "..sHelloMes.."! •••")
        Core.SendToAll("<"..sBot.."> ••• "..sHelloMes.."! •••")
    end
end
OpConnected = UserConnected
RegConnected = UserConnected